|
> You are here:
Home /support /secure /install /Install Tutorial - Step 3
Previous - Next
Step 3
Position the dialer within 30 feet of the computer.
Connect 9-pin RS-232 comport cable to port labeled RS-232 comport on the dialer.
Be sure to screw cable connector to dialer using a small flat blade screwdriver to ensure connection is tight.
Then connect the other end of the RS-232 comport Cable to the 9-pin serial port on the back of your computer.
Be sure to screw cable connector to dialer using a small flat blade screwdriver to ensure connection is tight.
Previous - Next
|
