|
> You are here:
Home /support /secure /install /Install Tutorial - Step 18
Previous - Next
Step 18
NOTE: If you need to set up Virtual Display, or did not order displays, then go to this page next for the Virtual Display install tutorial.
Now check to see if the telephones at each station match up with that station's displays. Each display should have a station number. Pick up the telephone receiver (or turn on the handset) at Station #1, and watch the display to see if it reads "Logged Off."
If it does read "Logged Off," then move on to the next display/station. If the first display does not read "Logged Off" leave the receiver off the hook and go around the room checking to see which display does read "Logged Off." Once you have found the display that is showing the "Logged Off" screen, go to the top row of the dialer and match up the display that is showing information with the correct station number. For example, if Station #1 receiver is picked up, but Station #4 display reads "Logged Off" then switch the phone cord going into Operator Station #1 on the top row of jacks on the dialer with number #4 cord going into the top row of jacks.
Once all the displays match up with the station telephones you are ready to move on.
Previous - Next
|
